T190WHITE White 5-Way Trim Guide
Select product from below list
T-921 Jiffy Steamer The Jiffy Steamer is a commercial steamer. It is impact resistant, with a 1300 watt heating element and heats up in two minutes with 2 hours of steaming per filling. Great for removing film and adhesive from vehicle rear windows.(120 volt, alternate voltage available upon request).
T1004 OLFAâ€ˆDC4 Blade Disposal Blade disposer that can be emptied and re-used
Smooth-It is designed to effectively and evenly smooth out the edge of most tools used for film installation. It works great on plastic and rubber tools. The black mat is a medium fabric that works best and faster on big or deep scratches in the tool’s edge while the grey mat is a fine fabric that is ideal for removing small or light scratches from the tool.
T921C Jiffy Steamer J2w Replacement Bottle. Replacement bottle for the J2W jiffy steamer (T-921)
T191 The Edge Tool A convenient trim guide or can be used to pull back gaskets.
T135 BLADEater Designed for professional installers, the BLADEater holds your knife safely and securely, and allows you to easily snap and discard blades into the replaceable well.
T251 Wagner HT3500 Digital Heat Gun This model allows you to heat shrink in low or high fan speeds and has a variable temperature setting to fine tune the amount of heat needed for a specific application. (120 volt)
SS-MINI SOAK SHIELD -MINI
SS-OG SOAK SHIELD -ORIGINAL
SS-XL SOAK SHIELD-XL
SS-INSTALLER SOAK SHIELD -INSTALLER SET
The window tinting industry's original braided water-absorbent rope. Soak Shield is tucked between the glass and the deck to reduce the chances of water damage to electronic parts during film installation.
T030 Motus D Grip Handle Use with almost any handled squeegee to give extra leverage.
T190BLACK Black 5-Way Trim Guide Use these tools as a trim guide or wrap in paper towels and use as a bump tool.
T-979 Kevlar Heat Gloves (Pair)
DOTRIX Dot Matrix Vinyl 16”x50’ Gives the dot matrix area on cars a smooth finished look. Pressure sensitive adhesive requires no heat shrinking
T921B Jiffy Steamer J2W Replacement fuse
T190 Gray 5-Way Trim Guide
T134 BLADEater Replacement Well
T-250 Wagner HT1000 Heat Gun (120 volt)
- GT2082B BLACK REPLACEMENT MAT
- GT2082G GREY REPLACEMENT MAT
Smooth-It Replacement Mat are sold in a 3 pack. The Black(600D) mat is a medium fabric that works best and faster on big or deep scratches. The grey (1000D) is a fine fabric, ideal for removing small or light scratches on your installation tools.
Ergodyne Waist Apron (Special order) 13 Pocket tool waist apron
T132 Hook Tool Use this tool to pull back on rubber gaskets in auto doors to tuck film below the seal.
T-130 Gasket Wizard This device is used to carefully pull back gaskets for easy film-to-glass installations below the gasket. Rub rails are located at the base of all automotive door window glass and are used for weatherproofing the openings between the glass and the door structure. Many installers find the Gasket Wizard helpful, even without the use of the bungee cords.
T176 Waist Apron
GT033 RED DEVIL SQUEEGEE
Flexible squeegee that is great for tight corners and maneuvering around gaskets.
Jiffy Steamer J4000W Steam blade The J4000W has a large 1 gallon internal water reservoir & provides 2 hours of continuous steam before refilling. Quick 15 min heat up time. Go from Preheat to steam power in just 2 min Flexible hose measures 7.5' 9" aluminum steam head concentrates steam into a targeted area for precise removal. Steam- resistant nitrile gloves included in each unit. (120 volt; alemate volta-geavailable upon request)