The Conquerer Squeegee

The Conquerer is the original corner reach tool. Features a soft squeegee blade along one edge and pointed hard card tips on the ends making it a versatile staple to any tool kit.

Olfa "A" Knife

Used for film pattern cutting and trimming. Features a molded plastic handle for maximum control and comfort. Right or left hand use.

Olfa "Silver" Stainless Steel Knife 

The original olfa stainless steel knife.

NT PRO A1 " RED DOT" KNIFE

Regarded by many installers as the finest professional knife available. The blade can be advanced in 1/2 segment increments for precision control. Right or left hand use. Now includes a stainless steel blade.

OLFA "SILVER 2" KNIVE

Significantly improved over the original “Olfa Silver”. Features right or left handuse, blade position auto-lock, and one-segment click-action.

OLFA XA1 ERGONOMIC KNIFE

This ergonomically correct knife features a comfortable rubber grip for better control and less fatigue.

PLASTIC UTILTY KNIFE

Used for film pattern cutting and trimming.

OLFA SAC1 KNIFE

Slim stainless steel body with a 30° angle blade for precision in pattern cutting. Great for graphics and paint protection. Use T1052 or T2100 replacement blades.

KDS L-22 Grip fit Auto lock

Heavy- duty knife with comfortable grip. Use with any 8 pt. blade(T1021, T131, or T263) to cut window film 7 milor greater.

OLFA PA2 PRO-LOAD KNIFE

Holds up to five blades at a time giving you 65 new cutting segments per load.

NT Injector Cartridge Knife

Used for film pattern-cutting and trimming. Holds five blades for automatic blade replacement capabilities.

NT A1000RP KNIFE

Cartridge cutter with aluminum diecast grip. Cartridge holds up to 5 blades.

NT A250RP AUTO-LOCK KNIFE

Chemical-resistant and heat-resistant polypropylene grip. Ratchet autolock slider locks blade in place while cutting. Right or left hand use.

NT L500GRP KNIFE

NT heavy-duty knife with ratchet autolock slider which locks the blade into place while cutting. Blade storage in handle. Use with 7 mil or greater films.

8PT AUTO LOCK KNIFE

Heavy-duty knife with breakaway points for use with security films 7 mil or greater. Blade storage in handle.

NT A300GR KNIFE 

All-purpose standard duty utility knife with stainless steel sliding holder and sturdy aluminum die cast grip for long lasting use. Ratchet auto-lock slider locks blade in place while cutting. End cap also functions as a blade snapper. Designed for either left or right handed use with simple reversal of blade.

Under Pro Handle

For use with the T053, T054, T055 or T056 stainless steel channels with black rubber for cleaning or blue replacement blades(T118) for installation.

32oz. Bottle

Empty 32 ounce bottle only.

MAXI TRIGGER SPRAYER

An industry staple. Ergonomic trigger with high output and durability.

SPRAYMASTER BOTTLE & TRIGGER

An overall heavy-duty sprayer, this spray bottle comes with a 5 year manufacturers warranty and is chemically resistant. It is equipped with a strong trigger and holds 32 ounces.

MERCURY PRO+ BOTTLE & TRIGGER

"The next generation in spray bottles, the Mercury PRO+ features viton seals and a double action pump that sprays both when you pull back and when you release the trigger giving you more liquid with each pull. This lightweight ergonomic trigger/bottle combo holds up to 1 liter (33 ounces) of fluid."

5 GALLON STAINLESS STEEL SPRAYER

Deluxe pressure sprayer holds up to 5 gallons of mounting solution in a stainless steel tank. Hose can reach up to 25’ in length. Fill with solution and pressurize with air from any compressor. Curly, flexible hose reaches into cars or stretches to go up a ladder with you.

POLYSPRAY 2

This pressurized spray bottle holds more solution than the 32 oz. bottles and reduces “finger-fatigue” eliminating the need for pumping while spraying via a simple trigger. Handy for large windows and long duration sprays. Has an adjustable spray nozzle. (1.25 liters)

REPLACEMENT SPRAY GUN FOR T101N

Replacement nozzle for T101N and T-1029.

25’ REPLACEMENT HOSE AND SPRAY GUN FOR T101N

Replacement hose and nozzle assembly for 5 gallon Stainless Steel Sprayer. T-101N and T-1029 .

Blade Holder for T822

Blade not included

72” BOX SLITTER CHANNEL

"72” aluminum U-channel for sliding over the edge of a film box to serve as a straight edge when making horizontal cuts (across the web width) after pulling film out to desired length. Handy for in-field work. Saves the cost of more expensive film cutters. Blade Holder (T821) sold separately."

CLEAN CUT BOX TRAY

Allows film boxes to be mounted on top of a ladder.Simply attached the tray to the top of your ladder using the eyebolt that is supplied creating a steady work surface.

CLEAN CUT CUTTER HEAD ASSEMBLY

Cutter head assembly for the clean cut box slitter. The Clean Cut Cutter Head is now machined from composite with two neodymium magnets that provide tremendous attachment to the Clean Cut Bar.

36" CLEAN CUT BOX SLITTER

"Clean cut is back and better than ever! Available in 36″, 48″, 60″ and 72″ sizes. The new and improved bars are an alloy U channel in a brushed polished finish. Each bar has a ruler across the top edge for precise measuring and placement of the Cutter Head. Cutter Head Sold Separately."

48" CLEAN CUT BOX SLITTER

"Clean cut is back and better than ever! Available in 36″, 48″, 60″ and 72″ sizes. The new and improved bars are an alloy U channel in a brushed polished finish. Each bar has a ruler across the top edge for precise measuring and placement of the Cutter Head. Cutter Head Sold Separately."

60" CLEAN CUT BOX SLITTER

"Clean cut is back and better than ever! Available in 36″, 48″, 60″ and 72″ sizes. The new and improved bars are an alloy U channel in a brushed polished finish. Each bar has a ruler across the top edge for precise measuring and placement of the Cutter Head. Cutter Head Sold Separately."

72" CLEAN CUT BOX SLITTER

"Clean cut is back and better than ever! Available in 36″, 48″, 60″ and 72″ sizes. The new and improved bars are an alloy U channel in a brushed polished finish. Each bar has a ruler across the top edge for precise measuring and placement of the Cutter Head. Cutter Head Sold Separately."

60” FILM HANDLER

The T910 or T911 Film Handler comes standard with 2 each Cutter Head Assembly (T912), 2 each 3” Roller Assembly (T904) and one pack of blades (T943). LADDER NOT INCLUDED

72” FILM HANDLER

The T910 or T911 Film Handler comes standard with 2 each Cutter Head Assembly (T912), 2 each 3” Roller Assembly (T904) and one pack of blades (T943). LADDER NOT INCLUDED

6” ROLLER ASSEMBLY

Use for security film on 6” cores. Comes with 12” risers to accomodte rolls of film on 6” cores. Sold as a pair (2).

FILM HANDLER BLADE HOLDER

The swivel head portion of the blade holder.

FILM HANDLER REPLACEMENT BLADES

20 blades per cartridge.

FILM HANDLER REPAIR KIT

Set includes two knobs, two springs and one ball spring plunger.

FILM HANDLER CUTTER ASSEMBLY

This is the base and the swivel head of the blade holder.

3”ROLLER ASSEMBLY

Standard roller assembly on Film Handler. These are 6” risers and will accommodate film on 3” cores. Sold as a pair (2).

1/4” SHIM FOR 3” HUBS

Sold as eaches (1).

1/8” SHIM FOR 3” HUBS

Sold as eaches (1).

1/4” SHIM FOR 6” HUBS

Sold as each (1).

OLFA AB-50S STAINLESS STEEL SNAP BLADES

Pack of 50. The industry standard when it comes to snap blades for film and pattern cutting. Thirteen cutting edges per blade. Use in most standard duty knives.

OLFA AB10S STAINLESS STEEL SNAP BLADES

Pack of 10. The industry standard when it comes to snap blades for film and pattern cutting. Thirteen cutting edges per blade. Use in most standard duty knives.

T944 AUTOMOTIVE GLASS EDGE TRIMMER
Use along the top edge of roll
down windows for a precise “microedge” finish (1/8”). Use T137 as a
replacement blade.

OLFA AB-50B CARBON SNAP BLADES

"Standard carbon snap bladeswith superior sharpness and edge retention. This 9mm blade fits most standard duty knives and has 13 cutting edges per blade. Pack of 50."

Olfa A1160B CARBON 30 DEGREE BLADES

Standard duty acute angle snap-off
blade for use when precision is a must.
Seven cutting edges per blade strip.
Pack of 10.

NT BA-50P STAINLESS STEEL SNAP BLADES

Stainless steel snap blades from the makers of the “Red Dot” knife. Use in 9mm and multi-blade cartridge knives. Pack of 50.

Ceramic Safety Film Cutte

Designed to deliver rapid, precise cuts for thick gauge safety films. It is intended for precision pre-cutting on flat, square-edged tables.

OLFA LBB-50B ULTRAMAX 8PT BLADES

"Replacement blades for T111, T264 & T1019 heavy-duty knives. Triple honed for extremely sharp edge. Ideal for cutting thick films, 7 mil or greater. Pack of 50."

OLFA ULTRAMAX ABB-50B CARBON SNAP BLADES

An ultra-sharpcarbon blade ideal for applications where superior sharpnessis required. These blades are double-honed for extreme sharpness and are 25% sharper than the standard duty carbon blade. Eight cutting edges per blade, 50 blades per pack. Fits most standard Olfa knives.

BL50P BLADES

Heavy-duty NT blades for use with the T1019, T111, & T264. Pack of 50.

BAD21P 30° BLADE 10PK

NT BAD-21P 30° blade. 10 blades per pack, Carbon. Fits T1051, T026N and T027.

6"Triumph Carbon Blades

Pack of 25. Carbon steel offers strong capable scraping but rust more easily. Use for scraping adhesive and other debris from glass surfaces. Double edged. These blades fit any of standard 6" Triumph Scrapers.

6"Triumph Stainless Steel Blades.

Pack of 25. Long lasting rust resistant stainless steel blade. Double edge blade offers you more scraping than other blades.

6"Triumph SS Heavy Duty Blades(0.20x6")

Pack of 25. This rust resistant stainless steel blade is thicker and stronger than a use for those tough film removal jobs.

Heavy Duty Triumph Blades

Pack of 10. Carbon replacement blades for Red Heavy Duty Triumph Scraper (T106).

3" Triumph Blades

Pack of 10 carbon blades. Use in the 3" Triumph Scraper(T210).

KDS LB-50BH Power black 8pt Blades.

Pack of 50. Ideal for thicker films, 7 mil or greater. Fits T111, T264 & T1019.

KDS GB-50BH Power black G-Blade.

Pack of 50. The G-Blade is a double- honed extremely sharp 8 point blade that s ideal for cutting safety and security film. Fits T111, T264 & T1019.

1” SINGLE EDGE BLADES
Use in any 1” blade holder. #9 Carbon steel single edge blade, non-rust aluminum back. (.009”/.2286 mm) Pack of 100.

#12 1” SINGLE EDGE BLADES

Use in any 1” blade holder. #12 Carbon steel single edge blade, nonrust aluminum back. (.012”/.3048 mm) Pack of 100.

Stainless Steel 1" Single Edge Blades.

Pack of 100. Use in any 1" blade holder. Stainless steel, uncoated.

SCRAPERITE PLASTIC RAZOR BLADES

Pack of 100 blades. These plastic razor blades are double edged and safe for glass. Great for removing adhesives from window films and vinyl decals.

PLASTIC RAZOR BLADES

Perfect for removing leftover film and adhesive from surfaces that are easily damaged, such as rear window defrosters or other sensitive glass.

8 Point Blades.

Pack of 5. 18mm replacement blades. Fits T111, T264 and T1019.

4” Scraper Blades

Fits the T104 and T1023. Carbon, Pack of 10.(0.20mm x4”)

4” CARBON SCRAPER BLADES

Carbon, pack of 100. (0.017mm x4”). Fits the T104 and T1023.

Blue Hard Card Squeegee

White Hard Card Squeegee

Black Hard Card Squeegee

Pink Hard Card Squeegee

Gold Hard Card Squeegee

Platinum Hard Card Squeegee

Peach Hard Card Squeegee

Purple Hard Card Squeegee

4"3M Gold Squeegee

Universal Squeegee

Yellow Hard Card Squeegee

White Hard Card Squeegee

4” Lime Speed Wind (HARD)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped

6” Lime Speed Wind (HARD)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped

8” Lime Speed Wind (HARD)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped

4” Lemon Speed Wind (FLEX-FIRM)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped

6” Lemon Speed Wind (FLEX-FIRM)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped

8” Lemon Speed Wind (FLEX-FIRM)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped

4” Cherry Speed Wind (SOFT)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped

6” Cherry Speed Wind (SOFT)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped

8” Cherry Speed Wind (SOFT)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped

4” LIDCO FELT SLEEVE

A felt wrap for any 4” hard card squeegee

4” BUMP CARD WITH FELT EDGE

Yellow Lidco Squeegee

Grey Lidco Squeegee

6” GRAY LIDCO SQUEEGEE

PVC SQUEEGEE-YELLOW FLAT

Flat Yellow Lidco Squeegee.

PVC SQUEEGEE-SQUARE EDGE

Square Edge Yellow Lidco Squeegee.

UV LIGHT SOURCE LAMP

"Excellent tool to demonstrate, measure or show how much UV window films keep out. Powered by 4 “AA” alkaline batteries (NOT included)."

HEAT LAMP UNIT

Great tool for tabletop presentations. Powered by 110 volt power cord. (Plug in).

Digital Tape Measure

This compact meter uses a narrow beam to measure distances instantly, even through door openings and in crowded rooms. Lifetime lithium battery included.

PROFESSIONAL METER SALES KIT W/CASE

Our UV & Solar Sales Presentation Kits offer a single source for convenient and convincing sales demonstrations. Kit includes: T968 Digital BTU & Trans-Meter, T962 Heat Lamp Unit, T973 UV Meter, T963 UV Light Source Lamp, T971 Soft Casewith Strap.

GLASS SAMPLE SET

Conduct your sales demonstration effectively by including glass samples to help illustrate the benefits of film over standard glass. Includes 2 clear single pane, 2 clear IG and 2 low-E sets.

UV SENTRY METER

"Position the meter facing the UV source, such as sunlight or a heat lamp (T962), and turn the meter on. Place various materials between the meter and the UV source and the resulting UV Transmission percentage will be displayed. Powered by a 9-volt alkaline battery (included)."

SP1065 DIGITAL BTU SOLAR POWER METER

"This wide spectrum digital meter measures solar radiant energy intensity directly transmitted through glass (or the film-glass combination) in units of BTUs per square foot per hour or watts per square foot. Effective tool showing the relative effectiveness of various films in blocking solar radiant heat. Especially useful for showing how a very dark dyed film may allow far more energy to pass through than a much lighter metallic film. Can be switched to read in metric units. Powered by a 9-volt alkaline battery (included)."

UV AND SOLAR DUAL TRANSMISSION METER

Combine the popular features of the T973 & T968 into one simple to use meter. Powered by a 9 -volt alkaline battery (included).

SP2065 SOLAR TRANSMISSION & POWER METER

Use this meter to evaluate solar performance. It provides excellent resolution, reading low light conditions more accurately than competitors, with no need for adjustments. The easy to read digital display toggles between power and transmission percentage mode. It’s small, portable, and convenient to take out in the field. Can be switched to read in metric units. Powered by a 9-volt alkaline battery (included).

INSULATED GLASS THICKNESS & GAP GAUGE

Used to measure glass and air space thickness in sealed insulating glass units. Carrying case included. Powered by two standard “AAA” alkaline batteries (included).

STRENGTHENED GLASS DETECTOR

Allows users to confirm if glass has been strengthened. The detector can test single panes of glass or multiple panes in a window at a single time, and from a single side.

LOW-E COATING DETECTOR

Detects the presence and location of thermal resistant coatings (LOW-E) used on energy efficient single and dual pane glass. Never requires calibration. Powered by a 9-volt alkaline battery (included).

SPECTRUM DETECTIVE METER

Displays three ratings at a time: UV, Visible Light, and Infrared transmission values. Carrying case included. Powered by a 9-volt alkaline battery (included). Glass samples not included.

SS2450 SOLAR SPECTRUM TRANSMISSION METER

This device is the most accurate meter to date. It is the only meter calibrated to ISO9050, NFRC300 and EN410 standards. Effortlessly demonstrate six performance characteristics at a time including two IR measurements: UV, VIS, SOLAR, IR 900-1000 nm, and IR 780-1780 nm ensuring the complete picture of a window film’s performance. Simply slide the glass sample into the opening and see the resulting values displayed. No additional light sources are needed. Everything is self-contained in a single convenient package to visualize the true performance of a glazing system, this meter is a must. Glass samples not included.

TINT-CHEK TC1800 AUTOMOTIVE METER

Measures visible light transmission (VLT) on roll down windows. A smaller meter that fits comfortably into a shirt pocket. Tremendous reliability, ignoring ambient light. Calibrated to a NIST traceable standard.

TINT-CHEK + TC2800 AUTOMOTIVE METER

"Measures visible light transmission (VLT) on roll down windows. Includes ALL the benefits of the TC1800 (T2035) plus features a backlit LCD display making it much easier to read in low light conditions. Reads to the nearest tenth percent for greater accuracy. Calibrated to a NIST traceable standard."

FUSION YELLOW TURBO PRO 5 1/2"

The TM2000 Inspector II is the newest in light meter technology allowing you to measure ALL windows on vehicles with autocalibration accurate to within +- 2%.

TINT CHEK PRO( TC3800) 2 PC AUTO METER

Measure Visible Light Transmittance (VLT) of automotive glass as well as any glass/film up to 1/4” or 6.5mm thick.

MOTUS D GRIP HANDLE

Use with almost any handled squeegee to give extra leverage.

Hook Tool

Use this tool to pull back on rubber gaskets to tuck film below the seal.

BLADEater

Designed for professional installers, the BLADEater holds your knife safely and securely, and allows you to easily snap and discard blades into the replaceable well. Once the well is full, simply toss the well, blades and all.

The Edge Tool

A convenient trim guide or use the curved edge to pull back gaskets.

BLADEater Replacement Well

GRAY 5 WAY TRIM GUIDE 

Use this tool as a trim guide or wrap in paper towels and use as a bump tool.

BLACK 5 WAY TRIM GUIDE

Use this tool as a trim guide or wrap in paper towels and use as a bump tool.

WHITE 5 WAY TRIM GUIDE 

Use this tool as a trim guide or wrap in paper towels and use as a bump tool. Each of these offers unique shapes and corners. The T-190 White even features a ruler. 

JIFFY STEAMER J2W FILM REMOVER

Impact resistant, with a 1300 watt heating element and heats up in two minutes with 2 hours of steaming per filling. Great for removing film and adhesive from vehicle rear windows. (120 volt; alternate voltage available upon request).

Waist Apron

Heavy Duty waist apron for easy access to tools while on the job

FURNO 300 DUAL TEMP HEAT GUN

Furno 300 Dual Temp Heat Gun with high, medium, low settings. (120 volt)

ERGODYNE WAIST APRON

13 pocket tool apron.

KEVLAR HEAT GLOVES (PAIR)

Heat-resistant gloves great for use during heat shrinking.

JIFFY STEAMER J2W REPLACEMENT BOTTLE

Replacement bottle for the J2W Jiffy Steamer (T921).

Jiffy Steamer J2W Replacement fuse

DOT MATRIX VINYL 16”X50’

Gives the dot matrix area on cars a smooth finished look. Pressure sensitive adhesive requires no heat shrinking.

OLFA DC4 BLADE DISPOSAL

Blade disposal unit that can be emptied and reused.

JIFFY STEAMER J4000W STEAMBLADE

"The J4000W has a large 1 gallon internal water reservoir and provides 2 hours of continuous steam before refilling. Go from PREHEAT mode to full steam power in just two minutes. Has a flexible 7.5’ hose for easy maneuverability on the job and an angled 9” aluminum steam head that concentrates steam into a targeted area for precise removal. Steam- resistant nitrile gloves included in each unit. (120 volt; alternate voltage available upon request)."

SMOOTH-IT W/BLACK MAT

It’s recommend to use the SMOOTH-IT on your tools at least once a day. Black: Medium mat that works best and faster on big or deep scratch.

SMOOTH-IT REPLACEMENT 3PK BLACK

Black: Fine mat, ideal for removing small or lite scratches of the tool. THIS IS REPLACEMENT MAT'S ONLY

RED DEVIL SQUEEGEE

Flexible squeegee that is great for tight corners and maneuvering around gaskets.

MAX FLUX HEATING ELEMENT

Heating element replacement for the Max Flux Heat Gun.

SOAK SHIELD INSTALLER 

SoakShield Package Special SoakShield Installer

SOAK SHIELD ROPE-MINI

The Mini size SoakShield is the same length as the original only 30% thinner. Able to fit better it tight gap spaced. Works great for back windows also.

SMOOTH-IT W/GREY MAT

It’s recommend to use the SMOOTH-IT on your tools at least once a day. Grey: Fine mat, ideal for removing small or lite scratches of the tool.

SMOOTH-IT REPLACEMENT 3PK GRAY

Grey: Fine mat, ideal for removing small or lite scratches of the tool. THIS IS REPLACEMENT MAT'S ONLY

MAX FLUX HEAT GUN

The Fusion Max Flux Heat Gun is the first heat gun specifically designed for the window film industry. Offers a style that fits perfectly in the nook of your arm for precision handling. The 26 CFM gives you tha ability to spread the heat exactly where you need it. With an adjustable heat guage from 750 - 1000 degrees (Fahrenheit) this heat gun is a good choice for any job. Includes a full roll of Fusion Afterburn Tape in the box and preinstalled!

SOAK SHIELD ROPE-ORIGINAL

Original Standard size is 5-6' long depending on stretching it out during installation. Great for your average coupe, sedan, compact SUV.

SOAK SHIELD ROPE-XL

Our XL size SoakShield rope able to extend the dash on larger Cars, Trucks, Vans, and SUVs. 18” longer than Original.

HEAT SHEET DEMO CARD

"Vibrantly changes color when it encounters heat. To demonstrate heat blocking capabilities of your glass or film, use the Demo Card in combination with a heat lamp."

Heat Sheet Acrylic Stand

1/2” BLACK OUT TAPE

Black matte vinyl used to hide light gaps along edges of film installations. (150’ per roll)

1” BLACK OUT TAPE

Black matte vinyl used to hide light gaps along edges of film installations. (150’ per roll)

1 1/2” BLACK OUT TAPE

Black matte vinyl used to hide light gaps along edges of film installations. (150’ per roll)

3/8” RED FILM TAPE

Features low-tack adhesive. Use to retape film rolls for storage. (60.1 yards per roll)

1” RED FILM TAPE

Features low-tack adhesive. Use to retape film rolls for storage. (60.1 yards per roll)

DO NOT ROLL DOWN STICKER

Perfect as a reminder on new auto installs. Features low-tack adhesive. (1000 per roll)

DO NOT ROLL DOWN STICKER

Approximately 200 stickers per roll.

3/4” BLACK ACRYLIC FELT

Helps reduce scratching of automotive films on some vehicle roll down windows. (50’ per roll)

BLACK ACRYLIC FELT

Helps reduce scratching of automotive films on some vehicle roll down windows. (50’ per roll)

YELLOW FILM MARKER

Handy for 3 basic purposes: 1. Marking film prior to installation of windows with unusual shapes (arches, trapezoids, etc.) which must be cut to approximate shape before the final “lay-up”. 2. Circling a contaminant (hair or fiber) before pulling back the film to remove it. 3. Marking film edges to check for glass movement on side roll-ups during the trimming process. Yellow grease mark easily wipes away.

FILM OPAQUER PEN - THIN POINT

Used by installers to hide fine line mistakes in trimming which causes light intrusion at the film edge.

FILM OPAQUER PEN - BROAD POINT

Used by installers to hide fine line mistakes in trimming which causes light intrusion at the film edge.

12” TRIANGLE

45/90° with circle templates.

8” TRIANGLE

30/60° with circle templates.

36” STRAIGHT RULER

Imperial measurements including 1/8ths & 1/16ths.

FUSION FORCE GRIP

A speciality handle made for pushing attachment systems into proper placement.

FUSION AFTERBURN TAPE

This amazing product is self-adhering, meaning it bonds to itself with no adhesive. When it’s removed, there is no leftover glue residue. Apply it to anything and everything! Torch tips, heat guns, tools, steamers, and more! The list is endless! This tape stretches up to 300% and molds perfectly to odd shaped items. High heat resistance up to 500 degrees Fahrenheit (about 260 degrees Celsius) with only one layer applied. Double or triple your layers to increase your level of heat resistance and protection!

FINISH LINE KNIFELESS TAPE

The Knifeless Tape has a high strength filament that creates a clean sharp cut without the risk of damaging painted surfaces. (50m / 164’ roll)

Slip Tape

Slip tape is the ultimate product for making your application squeegees smoothly and safely glide across window film, paint protection, car wrap and vinyl graphic applications. Avoid tearing or scratching the material you are working with. Include this product in your tool box!

3M WET OR DRY SQUEEGEE

Soft rubber card style squeegee. Recommended for paint protection installations.

4” MAGNETIC BLACK BONDO

Magnetic bondo squeegee is great for the application of car wraps, cutting window film patterns, and vinyl graphics. The strong magnets allow you to hold the material in place in addition to holding your knife for easy access.

TEFLON TAPE 3/4" X 4 YD

Slip tape is the ultimate product for making your application squeegees smoothly and safely glide across window film, paint protection, car wrap and vinyl graphic applications. Avoid tearing or scratching the material you are working with. Include this product in your tool box!

Mango Pro Pack with Felt

Includes one each T2005, T2006, T2007 & T2008

MANGO SMART CARD WITH FELT

Mango Smart Card with Felt Smart card features a grip-handle molded right into it's body so they're easy to manipulate. The felt edge makes this the perfect tool for paint protection. Vinyl signs & Graphics.
The Monkey Strip felt added to the edge of these tools make them perfect for paint protection, vinyl signs and graphics.

MANGO REBEL WITH FELT

Card squeegee with good angles that extends your area for better manipulation. Great for getting behind gaskets and rubber seals.

MANGO LITTLE FOOT WITH FELT

This squeegee measures about 6"(15 cm) along the usable edge . The pointed edge of this tool allows the installer to squeegee in very tight areas.

Mango bump card with felt

4" mango bump card with extreme glide felt edge treatment.

SUNNY TUCKER

This wrap tool provides multifunctionality use by allowing the installer to reach edges and body lines like never before. This tool is a must have if you apply any graphics to challenging surfaces.

PPF HORNET 4" PADDLE SQUEEGEE

The Fusion PPF Hornet is the latest in Paint Protection Film installation tools. This triple durometer paddle squeegee offers the handler two durometers to install with.

EMBLEM REMOVAL TOOL

This tool is used before the vehicle wrap/vehicle graphic application to remove emblems, logos and badges from your vehicle. Our Emblem Removal Tool comes with custom designed ergonomic handles that are comfortable to use.

SOOPER CLIP (2 PACK)

Faster and easier than tape or rubber bands. These brightly colored Sooper Clips are designed for efficiency.

SOOPER CLIP (50 PACK)

Faster and easier than tape or rubber bands. These brightly colored Sooper Clips are designed for efficiency.

WET EDGE SQUEEGEE

Wrap your vehicles faster and better. The only squeegee applicator made to use wet. No scratches, no marks, just smooth motions that easily glides across vinyl films and painted surfaces without worry of mistakes or damage. The Wet Edge Squeegee is a Teflon squeegee with a unique microfiber bonded to it. Can be used either wet or dry. This is the top of the line applicator in the business. Colors will vary.

WRAP GLOVE WG1

The new Wrap Glove is sold in pairs and is a must have for anyone installing vinyl graphics and vehicle wraps. Installing with your bare hands can cause over stretching and puckering of the vinyl as well as potential damage from the transfer of oils on your skin. These lint free and durable Wrap Gloves reduce friction while handling the material giving you great results every time.

RIVET BRUSH

Made of stiff bristle synthetic fiber, the rivet brush for fleet graphic installers helps form flexible cut and printed vinyl over the rivet surface.

SQSOFT4-GREEN SOFT FLEX SQUEEGEE

The 4” Green Soft Flex Squeegees is the thinnest and the softest installation card that we offer. Made from a unique rubber and plastic blend, this squeegee has excellent bend and flex characteristics which make it perfect for applications on curved surfaces.

TSQ4G-GOLD NYLON BLEND SQUEEGEE

This unique nylon blended gold squeegee comes with a harder and softer side to give you a dual purpose tool all in one card. This card will also be more durable than your typical plastic squeegee as it is made of higher grade nylon blended material. This card features three rounded corners and one 90 degree sharp corner to help you with any shape or application challenge.

DESIGN LINE KNIFELESS TAPE

Use Design Line Knifeless Tape to create graphic elements and striping on single layers of vinyl that have curves and contours. Design Line tape stretches more than other products so it follows contours and turns easier.

4” LEMON SUEDE BLADE (Flex-Firm)

Evolved from the success of the Speed Wing family the new Suede Blade has quickly answered a lot of challenges for installers. The Suede Blade comes with a dual layer fabric that gives installers a cushioned, smooth fabric over the edge of the squeegee. The Suede Blade glides over window tint, paint protection film and vinyl graphics/wraps with ease.

4” CHERRY SUEDE BLADE (Soft)

Evolved from the success of the Speed Wing family the new Suede Blade has quickly answered a lot of challenges for installers. The Suede Blade comes with a dual layer fabric that gives installers a cushioned, smooth fabric over the edge of the squeegee. The Suede Blade glides over window tint, paint protection film and vinyl graphics/wraps with ease.

SUEDE BLADE STRIP

4” Suede replacement strip. These are die cut to fit the 4” Speed Wing.

SQMAGWES MAGNETIC WET EDGE SQUEEGEE

Wrap your vehicles faster and better. The only squeegee applicator made to use wet. No scratches, no marks, just smooth motions that easily glides across vinyl films and painted surfaces without worry of mistakes or damage. The Magnetic Wet Edge Squeegee is a Teflon squeegee with a unique microfiber bonded to it. Can be used either wet or dry and the magnetic feature only makes it more perfect! This is the top of the line applicator in the business. Colors will vary.

4” PPF HYBRID PADDLE

This paddle squeegee is dual durometer and designed for paint protection films that feature a durable hard coat. The blue side of the PPF Hybrid is a hard 94 durometer while the orange side is a more flexible 85 durometer.

5” PPF BLACKOUT SQUEEGEE

5” CROPPED PPF BLACKOUT SQUEEGEE

The PPF Black Out is a squeegee blade designed specifically for paint protection film installs, but has also become a favorite in the automotive window film industry. The PPF Black Out features a high content of slip additives to help the tool slide easily across paint protection films. At 88 durometer it is flexible enough to conform to odd surfaces. Pair this blade with a magnetic Fusion Hand Dee (T037) to help hold the paint protection film in place during installation.

WG2- GHOST WRAP GLOVE (1 GLOVE):

The Ghost Glove is extremely slick so defining edges with hands is immediate with no drag. This glove is lint and static free and prevents oil transfer and fingerprints. Ghost Glove is rated as A2 (extremely) cut resistant. One size fits most. Ghost glove is sold as ONE glove not a pair.

WRAP CUT LINER KNIFE

The ultimate vehicle wrap knife! The Wrap Cut Knife by Image 1 Impact is made specifically to cut through just the liner side of any pressure sensitive vinyl graphic and wrap film. This knife will only cut through the paper release liner of the vinyl.

REPL BLADES FOR WRAP CUT KNIFE

This is the replacement blade for the Wrap Cut Knife, WCKNIFE. Each blade has 4 available cutting edges. 10 blades per pack.

XTREME MAGNET (SINGLE UNIT)

These handy body magnets make applying vinyl and vehicle wraps faster and easier by acting as another hand to hold the material. You can also use them in the place of masking tape or pre-mask to position the material on the vehicle.

XTREME MAGNETS-6 PER BOX

These handy body magnets make applying vinyl and vehicle wraps faster and easier by acting as another hand to hold the material. You can also use them in the place of masking tape or pre-mask to position the material on the vehicle.

MOLDING & TRIM REMOVAL TOOLS

The kit includes five distinctive tools for the easy removal of body fasteners, interior trim pieces, exterior body moldings, wheel hub caps, etc. Made from heavy-duty plastic to prevent scratching and damage to vehicle surfaces. 

INSTALLER’S PRIMER PEN

The Installer’s Primer Pen is easy to keep in your tool pouch, pocket, or tool box. Fast and easy to use on all your applications that require precise application of Primer 94. Works with any brand of vinyl film and can be used anywhere Primer 94 is required.

BUBBLE POPPER PEN

The Bubble Popper Pen is a must have tool for any vinyl graphics installer or car wrapper. This tool is used to put a pin hole (never a knife slit) into your vinyl, printed graphics or car wrap where a bubble or rivet might be to release the air and flatten the film graphic on to the substrate.

Film-On Concentrate

1 quart concentrate mounting solution. Use for pressure sensitive adhesives and sputtered copper films.

6" Triumph Scraper

Lightweight and maneuverable. Includes cover and one double- edged blade.

6” ANGLED TRIUMPH SCRAPER

The handle is tilted at a 30° angle.Includes cover and one double edged blade.

6” TRIUMPH SCRAPER WITH SLIDE COVER

This is the new and improved version of the slide covered Triumph. With a bigger button and smoother action, the cover easily opens and closes with no hassle. No more fumbling with a separate blade cover while doing ladder work. Great for regular window cleaning, but not recommended for stripping off old film.

6" RED HEAVY-DUTY TRIUMPH SCRAPER

Scraper ideal for film removal. Includes cover and one double edged blade. Use T110 as replacement blades.

6” ERGONOMIC TRIUMPH SCRAPER

An improved version of the angled 6” Triumph scraper with a more comfortable grip. Includes cover and one double edged blade.

6” ANGLED ERGONOMIC TRIUMPH SCRAPER

An improved version of the standard 6” Triumph scraper with a more comfortable grip and tilted handle. Includes cover and one double edged blade.

HEAVY-DUTY 1” RAZOR SCRAPER

Retractable safety scraper; intermediate blade position keeps the blade from sliding out while in use.

HYDE 1” RAZOR SCRAPER

1" Neon Mini Scraper

1” CLIP SCRAPER

These effective scrapers will accommodate standard or stainless steel 1” single edge blades as well as T139 plastic razor blades. 

ALL PRO 4” STRIPPER

This 4” scraper has an adjustable head as well as an adjustable knob for two handed use. Blades can be stored inside the handle.

4” SCRAPER WITH EXTENDED HANDLE

4” scraper with extended handle allowing for better leverage. Use with T105 or T1007 as replacement blades. Blade cover included.

3” TRIUMPH SCRAPER

Smaller version of the regular Triumph. Designed to fit perfectly into corners.

Big Blade (3” x 4”)

Jumbo size plastic razor blade perfect for cleaning & film removal.

8” SILVER SECURITY SQUEEGEE

Comfortable, ergonomic handle is designed especially for security film installation. Comes equipped with the T041 blade. Curved handle applies more pressure to surface, reducing fatigue and ensuring easier, better installations. Blade is replaceable with either the Security Squeegee (T041), Flatfoot (T059), Pro Squeegee(T061), or Orange Crush (T259)blades.

8" SILVER SECURITY SQUEEGEE BLADE

Standard replacement blade for T042.

6” PRO SQUEEGEE DELUXE

An installation squeegee as a ready-to-use assembly. Used to remove application solution during the installation of all flat glass film types.

6” PRO SQUEEGEE BLADE

Replacement blade to Pro Squeegee Deluxe (T062) used as a means of removing application solutions from beneath the film during the installation of all flat glass film types. Square edge.

6” FLATFOOT SQUEEGEE BLADE

Specially angled blades for the Pro Squeegee Deluxe (T062). The angle is designed to maximize the surface area in contact with the film, thereby removing much more mounting solution than a standard Pro blade with a square edge. Beveled edge.

8” PRO SQUEEGEE DELUXE

An installation squeegee as a ready-to-use assembly. Used to remove application solution during the installation of all flat glass film types.

8” PRO SQUEEGEE BLADE

Replacement blade to Pro Squeegee Deluxe (T064) used as a means of removing application solutions from beneath the film during the installation of all flat glass film types. Square edge.

8” FLATFOOT SQUEEGEE BLADE
Specially angled blades for the Pro Squeegee Deluxe (T062). The angle is designed to maximize the surface area in contact with the film, thereby removing much more mounting solution than a standard Pro blade with a square edge. Beveled edge.

"UNGER ERGOTEC (SPRING) HANDLE"

Features a spring mechanism for quick blade changing and a finger indent on the top of handle for complete control. For use with T053, T054, T055 or T056 channels with black rubber for cleaning or blue(T118) for installation.

6” SQUEEGEE & CHANNEL

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (T050 or T050E). Used in the flat glass cleaning process and in the final cleanup after the film installation to remove soap streaks or smudges.

8” SQUEEGEE & CHANNEL

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (T050 or T050E). Used in the flat glass cleaning process and in the final cleanup after the film installation to remove soap streaks or smudges.

12” SQUEEGEE & CHANNEL

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (T050 or T050E). Used in the flat glass cleaning process and in the final cleanup after the film installation to remove soap streaks or smudges.

18” SQUEEGEE & CHANNEL

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (T050 or T050E). Used in the flat glass cleaning process and in the final cleanup after the film installation to remove soap streaks or smudges.

140” SQUEEGEE BLADE

Replacement blades for Unger squeegee channel. Use for window cleaning, not installation.

12” SQUEEGEE BLADE

Replacement blades for Unger squeegee channel. Use for window cleaning, not installation.

18” SQUEEGEE BLADE

Replacement blades for Unger squeegee channel. Use for window cleaning, not installation.

UNGER 36” HARD REPLACEMENT BLADE

Hard replacement rubber is ideal for warmer working conditions and for optimum liquid removal on large, flat surfaces.

6" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channels (pg.6).

8" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channels .

12" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channels 

18" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channels 

120" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channels.

Side Swiper Handle Only

SIDE SWIPER WITH BLADE

A great tool for the lower edge of rear windows and behind brake lights. Use 6” of T118, T2107 or T2108 as a replacement blade.

THOR'S HAMMER

Use for 6-mil+ safety film installations, and final pass on slow drying thin films. (Flat Glass Applications). Use T117C as a replacement blade.

8" FUSION HANDLE

Ideal handle for all residential and commercial applications. Holds the 8” Orange Crush Squeegee Blade (T259) and 8” Blue Max Squeegee Blade (T117-8).

5" FUSION HANDLE

These handles are designed to optimize your leverage in removing mounting solution. Great for high performance automotive films and smaller residential windows. These handles accommodate the Orange Crush, Blue Max and Super Clear Max Squeegees.

5" FUSION HANDLE-SHORT HANDLE

These handles are designed to optimize your leverage in removing mounting solution. Great for high performance automotive films and smaller residential windows. These handles accommodate the Orange Crush, Blue Max and Super Clear Max Squeegees.

5” FUSION SHORTY HANDLE

A revised version of the T1058-5” Fusion Short Handle. This version is without the collar around the top of the handle. Designed to optimize your leverage in removing mounting solution. Holds any of the 5” squeegee blades. Great for high performance automotive films and smaller residential windows.

Performax Handle

Ideal for water extraction when used with T117, T117B, T203 or T257. Features a socket that accepts standard broom or paint roller extensions. This allows installers to get more leverage.

Go Doctor Blue

A fully integrated squeegee system where all of its components have been designed together, to work together. The I-beam handle fits comfortably in your hand. Go Doctor's unique frame construction was specifically designed to transfer more of your energy to the blade's point-of-contact for greater efficiency and reduced installer fatigue. The I-beam handle is wrapped with a comfortable, non-slip material that provides secure grip. Go Doctor incorporates a quick-change blade system for speedy on the job replacements.

Go Doctor Yellow

A fully integrated squeegee system where all of its components have been designed together, to work together. The I-beam handle fits comfortably in your hand. Go Doctor's unique frame construction was specifically designed to transfer more of your energy to the blade's point-of-contact for greater efficiency and reduced installer fatigue. The I-beam handle is wrapped with a comfortable, non-slip material that provides secure grip. Go Doctor incorporates a quick-change blade system for speedy on the job replacements.

Go Doctor Red

A fully integrated squeegee system where all of its components have been designed together, to work together. The I-beam handle fits comfortably in your hand. Go Doctor's unique frame construction was specifically designed to transfer more of your energy to the blade's point-of-contact for greater efficiency and reduced installer fatigue. The I-beam handle is wrapped with a comfortable, non-slip material that provides secure grip. Go Doctor incorporates a quick-change blade system for speedy on the job replacements.

5" ORANGE CRUSH

These blades help expel water while keeping their strength. The Orange Crush conforms to curved glass. Blades fit into a handled grip or can be used alone.

5" CROPPED ORANGE CRUSH

These blades help expel water while keeping their strength. The Orange Crush conforms to curved glass. Blades fit into a handled grip or can be used alone.

8" ORANGE CRUSH

These blades help expel water while keeping their strength. The Orange Crush conforms to curved glass. Blades fit into a handled grip or can be used alone.

Blue Go Doctor

Blade(Firm) Use for window film and auto wrap installs.

Yellow Go Doctor

Blade(Flex-Firm) Use for window film, auto wrap, vinyle graphics and paint protection installs.

Red Go Doctor Blade Blade(Soft)

Handled Squeegees Use for window film, auto wrap, vinyle graphics and paint protection installs.

WHALE TAIL SQUEEGEE

Great for getting behind brake lights and back window applications.

WHALE TAIL REPLACEMENT BLADE

Replacement Whale Tail Squeegee blade.

WHALE TAIL HANDLE

TITAN SQUEEGEE

The Titan is made with the same plastic used to make bullet proof glass. This allows more strength and rigidity. The overall length is 14 3/4” which allows a longer reach for rear windows and its unique design will easily lift inner and upper door seals.

THE BULLDOZER I- AUTOMOTIVE

Allows you to get to those hard to reach areas, such as behind speakers, brake lights, low angles and rear windows. Features a 6” squeegee blade and is 15” in overall length.

THE BULLDOZER II- FLAT GLASS

Features reinforced ribs on the back side for extra rigidity and leverage. Includes 6” squeegee blade and is 15” in overall length. The Bulldozer Squeegees have a new rubber compound for less slip resistance, a flatter blade for better water extraction and added plastic under the blade corners for additional strength.

Big Foot

Specifically designed to remove water from the lower portion of rear windows. Features a flex-firm blade molded right into the long flattened tennis racquet-style handle. The handle is wrapped with genuine Head SofTac traction grip material. Reaching the lower deck of back windows is not a problem with Big Foot. This tool measures a full 15” from blade tip to handle end.

Slim Foot

Modeled after the Big Foot Squeegee, the Slim Foot has a slender design that can reach into tighter openings. This no rib squeegee helps reach behind brake lights and has a rubber grip for secure handling. Measures 15” from blade tip to handle end.

STROKE DOCTOR

Designed with an I-beam construction handle that features an ergonomic slip-resistant grip and longer blade to apply squeegee pressure more evenly in the most hard to reach places.

STROKE DOCTOR REPLACEMENT BLADE

SUPER CLEAR MAX SQUEEGEE WITH HANDLE

Ready-to-use installation squeegee. The specially modified Unger handle makes these installation squeegees must haves. The handle is sold separately as T050A. Replacement blades are available as part number T203A.

BLUE MAX SQUEEGEE WITH HANDLE

Ready-to-use installation squeegee. The specially modified Unger handle makes these installation squeegees must haves. The handle is sold separately as T050A. Replacement blades are available as part number T117A.

BLUE MAX 5” HAND SQUEEGEE

Installation squeegee for automotive and flat glass applications. Harder than T203; great for water removal.

ANGLED BLUE MAX 5” HAND SQUEEGEE

Installation squeegee for automotive and flat glass applications. Harder than T203, these tools are excellent for water removal.

SQUARE BLUE MAX 5” HAND SQUEEGEE

Ideal for installing security film.