Installation Accessories

  1. GRAY 5 WAY TRIM GUIDE 

    Use this tool as a trim guide or wrap in paper towels and use as a bump tool.

     

    T-190GRAY $3.5
    $3.50
  2. BLACK 5 WAY TRIM GUIDE

    Use this tool as a trim guide or wrap in paper towels and use as a bump tool.

    T-190BLACK $4.1
    $4.10
  3. WHITE 5 WAY TRIM GUIDE 

    Use this tool as a trim guide or wrap in paper towels and use as a bump tool. Each of these offers unique shapes and corners. The T-190 White even features a ruler. 

    T-190WHITE $3.62
    $3.62
  4. RED DEVIL SQUEEGEE

    Flexible squeegee that is great for tight corners and maneuvering around gaskets.

    T-033 $2.43
    $2.43
  5. The Edge Tool

    A convenient trim guide or use the curved edge to pull back gaskets.

    T-191 $6
    $6.00
  6. Shank

    Shank is a great tool for getting under tight molding.

    T-2029 $5.5
    $5.50
  7. MOTUS D GRIP HANDLE

    Use with almost any handled squeegee to give extra leverage.

    T-030 $10
    $10.00
  8. Hook Tool

    Use this tool to pull back on rubber gaskets to tuck film below the seal.

    T-132 $8.37
    $8.37
  9. DOT MATRIX VINYL 16”X50’

    Gives the dot matrix area on cars a smooth finished look. Pressure sensitive adhesive requires no heat shrinking.

    T-DOTRIX $144
    $144.00
  10. Waist Apron

    Heavy Duty waist apron for easy access to tools while on the job

    T-176 $12.59
    $12.59
  11. ERGODYNE WAIST APRON

    13 pocket tool apron.

    T-1080 $25.25
    $25.25
  12. KEVLAR HEAT GLOVES (PAIR)

    Heat-resistant gloves great for use during heat shrinking.

    T-979 $17.37
    $17.37
  13. FURNO 300 DUAL TEMP HEAT GUN

    Furno 300 Dual Temp Heat Gun with high, medium, low settings. (120 volt)

    T-250 $35.08
    $35.08
  14. WAGNER HT3500 DIGITAL HEAT GUN

    This model allows you to heat shrink in low or high fan speeds and has a variable temperature setting to fine tune the amount of heat needed for a specific application. (120 volt)

    T-251N $80
    $80.00
  15. MAX FLUX HEAT GUN

    The Fusion Max Flux Heat Gun is the first heat gun specifically designed for the window film industry. Offers a style that fits perfectly in the nook of your arm for precision handling. The 26 CFM gives you tha ability to spread the heat exactly where you need it. With an adjustable heat guage from 750 - 1000 degrees (Fahrenheit) this heat gun is a good choice for any job. Includes a full roll of Fusion Afterburn Tape in the box and preinstalled!

    T-270 $220.04
    $220.04
  16. BLADEater

    Designed for professional installers, the BLADEater holds your knife safely and securely, and allows you to easily snap and discard blades into the replaceable well. Once the well is full, simply toss the well, blades and all.

    T-135 $15.84
    $15.84
  17. BLADEater Replacement Well

    T-134 $6.59
    $6.59
  18. MAX FLUX HEATING ELEMENT

    Heating element replacement for the Max Flux Heat Gun.

    T-271 $97.5
    $97.50
  19. OLFA DC4 BLADE DISPOSAL

    Blade disposal unit that can be emptied and reused.

    T-1004 $5.24
    $5.24
  20. JIFFY STEAMER J2W FILM REMOVER

    Impact resistant, with a 1300 watt heating element and heats up in two minutes with 2 hours of steaming per filling. Great for removing film and adhesive from vehicle rear windows. (120 volt; alternate voltage available upon request).

    T-921 $297.71
    $297.71
  21. JIFFY STEAMER J4000W STEAMBLADE

    "The J4000W has a large 1 gallon internal water reservoir and provides 2 hours of continuous steam before refilling. Go from PREHEAT mode to full steam power in just two minutes. Has a flexible 7.5’ hose for easy maneuverability on the job and an angled 9” aluminum steam head that concentrates steam into a targeted area for precise removal. Steam- resistant nitrile gloves included in each unit. (120 volt; alternate voltage available upon request)."

    T-2015 $430.62
    $430.62
  22. JIFFY STEAMER J2W REPLACEMENT BOTTLE

    Replacement bottle for the J2W Jiffy Steamer (T921).

    T-921C $18.2
    $18.20
  23. Jiffy Steamer J2W Replacement fuse

    T-921B $5.35
    $5.35
  24. SMOOTH-IT W/BLACK MAT

    It’s recommend to use the SMOOTH-IT on your tools at least once a day. Black: Medium mat that works best and faster on big or deep scratch.

    T-2081B $12.29
    $12.29
  25. SMOOTH-IT W/GREY MAT

    It’s recommend to use the SMOOTH-IT on your tools at least once a day. Grey: Fine mat, ideal for removing small or lite scratches of the tool.

    T-2081G $12.29
    $12.29
  26. SMOOTH-IT REPLACEMENT 3PK BLACK

    Black: Fine mat, ideal for removing small or lite scratches of the tool. THIS IS REPLACEMENT MAT'S ONLY

    T-2082B $6.29
    $6.29
  27. SMOOTH-IT REPLACEMENT 3PK GRAY

    Grey: Fine mat, ideal for removing small or lite scratches of the tool. THIS IS REPLACEMENT MAT'S ONLY

    T-2082G $6.29
    $6.29
  28. SOAK SHIELD ROPE-MINI

    The Mini size SoakShield is the same length as the original only 30% thinner. Able to fit better it tight gap spaced. Works great for back windows also.

    T-SS-MINI $26.04
    $26.04
  29. SOAK SHIELD ROPE-ORIGINAL

    Original Standard size is 5-6' long depending on stretching it out during installation. Great for your average coupe, sedan, compact SUV.

    T-SS-OG $31.25
    $31.25
  30. SOAK SHIELD INSTALLER 

    SoakShield Package Special SoakShield Installer

    T-SS-INST $83.34
    $83.34
  31. SOAK SHIELD ROPE-XL

    Our XL size SoakShield rope able to extend the dash on larger Cars, Trucks, Vans, and SUVs. 18” longer than Original.

    T-SS-XL $36.47
    $36.47
  32. T944 AUTOMOTIVE GLASS EDGE TRIMMER
    Use along the top edge of roll
    down windows for a precise “microedge” finish (1/8”). Use T137 as a
    replacement blade.

    T944 $16.7
    $16.70
  • telephone

    USA: 1-877 978 6978

    Int'l: 1-305 418 9701

    Mon–Fri, 9 am–7pm EST

  • WHATSAPP

    Mon–Fri,  9 am - 7 pm EST

    Other Times - 

    Please leave a message to respond. 

  • EMAIL US

    We will respond quickly.

  • FAQ

    Find answers online anytime.

xSunFilms © .